ProductFor the plantStoriesBlogAboutData & securityРусскийBook a demo
Product

One workstation, from drawing to program.

Metallovy runs on an ordinary PC at the plant and opens in the browser. Drawing, 3D model, holes and program sit in one window — and every number on screen can tell you where it came from.

Read

Model, DXF and PDF: holes, hole tables, callouts and notes.

Compute

Coordinates from your zero, setups and depths — by tested geometry code.

Assist

An AI assistant with the same actions as the engineer. It proposes; people confirm.

Output

Heidenhain .H in your style, setup sheet, XLSX and DXF with the zero.

01 · Read

Every hole found, in the drawing's own groups

Metallovy reads the model and the sheet together. Holes are grouped as the drawing groups them — by its hole table A–M or by thread and diameter — and every callout like “4x M16” is checked against what the model really has.

Holes of a demo plate found and grouped
STEPIn the pilot

Holes from the solid model: centre, axis, diameter, depth, through or blind. Parts of a welded assembly are placed where they sit.

DXFIn the pilot

Views, scale from the title block, hole tables and callouts read from the sheet and matched to the circles.

PDFIn the pilot

The AI reads the drawing and builds the part from its dimensions. The part stays marked “not verified” until the engineer checks it.

Paper scans, photosIn development

Straightened image, dimensions read, circles found. A coordinate measured on a scan is always flagged approximate.

Coordinates of four holes come from the 3D model into the table
02 · Compute

Setups, zero and coordinates you can trace

Pick the setup and the zero — a corner, an edge, the middle, a hole or your own number. Metallovy recalculates every coordinate in machine axes, bolt circles included, and keeps the source of each value.

  • Welded assemblies. Base part plus the pads and ribs welded to it, taken from the STEP assembly.
  • Depths that make sense. From the hole table plus your shop's allowance; through holes get the model length plus the tool exit your programs use.
  • Approximate stays approximate. A value without an exact source is marked and asked about — never silently used.
03 · Assist

An assistant that works the way you do

Every capability in Metallovy is an action — a button for the engineer and a tool for the AI. So the assistant can open an order, read a drawing, change a depth or build a new part, but each change it proposes waits for a person to confirm it.

You can ask, for example
“The customer wants the M20 thread 42 deep, not 38.”
“Leave out the two holes on the pad — they're drilled after welding.”
“Build a plate 400 × 300 × 20 with four M10 through in the corners, 20 from the edges.”
“Read this PDF and tell me what's missing for the program.”
The AI links the callout “4x M16” to four holes; their coordinates stay locked
A request to the assistant becomes the same Depth action the engineer has
04 · Output

A program in your dialect — and the paperwork around it

Metallovy learns recipes from the programs your shop already runs — labels, cycles, comments, where the STOPs go — and writes new programs the same way, with tools only from your library.

  • Heidenhain .H — LBL per group, cycles 200/203/208/252, TOOL CALL from TOOL.T, STOP after each tool
  • Setup sheet — operations, tools with lengths, zero and offsets, cutting-time estimate
  • XLSX · DXF — coordinate table by group; DXF with the zero and labelled points for CAD
  • To the machine as today — on a USB stick, after a person checks it. Metallovy never drives the machine.
A Heidenhain program written line by line in the shop's style
Sixty points checked against the shop's program, all sixty match
05 · Check

Check any program before the first cut

Load an existing .H — written by hand, by Metallovy or years ago for an earlier revision. Its points are drawn over the part and compared hole by hole: positions, depths, through holes, Q203 surface and tools.

On a real order this is how we measured ourselves: 60 of 60 points on one plate and 68 of 68 across the order matched the shop's own program within 0.01 mm.

Your tool library, not a catalogue

Import TOOL.T, mark what is actually in use and where it lives. The generator and the assistant choose only from it: a blind M12 gets the 10.2 or 10.3 drill you really have — or a warning that a tool is missing, never an invented number. Speeds and feeds are entered by people.

What it needs to run

  • An ordinary PC at the plant — Metallovy opens in the browser; other PCs and tablets in the network can connect
  • No internet for geometry — reading DXF and STEP, coordinates and programs work offline
  • Internet for the assistant — only if the plant allows the cloud AI, with every request logged
  • Heidenhain TNC 530 — the dialect of the pilot; other Heidenhain controls next, Siemens and Fanuc on the roadmap
Pilot

Bring one drawing. Leave with a program.

Send us one real order and the program your shop wrote for it. We return the coordinates, a program in your style and a line-by-line comparison — then your machinist tries it on the next job.